PalmControlŽ Classic AirGraverŽ
click photos to enlarge
New orders between Dec 12
and Dec 31, 2019 for a Classic AirGraver will ship as pictured with
Steve Lindsay's engraving impressions on the body for no extra charge.
Also new orders for Classic PalmControls with a burl wood handle will
include the embellished inset disc as pictured in the butt. This offer
is for orders through Dec 31, 2019. After that time there may be an
additional charge, that has yet to be determined. For those that have
pending Classic orders that have not shipped, your tool will arrive
embellished for no extra charge. Thank you for your patience while
waiting for your order.
The PalmControlŽ handle is placed on a
Artisan handpiece to provide superior impacting control
without a foot pedal. It utilizes hand pressure to hold a graver in a cut to vary and control the impacting power of the tool automatically. The patented tool is like engraving with a traditional palm push graver only the user does not have to push as hard. If a person is used
to foot pedal engraving, a few minutes with the PalmControlŽ is all it takes for the improved responsiveness to be realized. The hand is more sensitive than the foot, and is capable of subtle corrections. For
the professional or the beginner, it is intuitive, faster, and makes the engraving process easier. The tool is capable of producing an enormous range of cuts, from fine
banknote-style engraving to removing heavy background. The optional tungsten dead blow piston allows greater top end power. The tool
is equally proficient at bright cutting and stone setting. It requires 60 PSI regulated compressed air from either an air compressor or a
CO2 cartridge. No electrical
connection is needed. PalmControlŽ AirGravers are protected by patents and patents
Lindsay gravers are made form surgical stainless steel. No aluminum is used in
the construction of the tool.
Using the PalmControlŽ involves the same technique as palm push engraving. It is not necessary to push any harder than
normal pressure used to hold a point snug in a cut with a foot pedal AirGraverŽ. The
PalmControlŽ has an adjustment for users to set to the amount palm resistance
felt, from light to heavy.
The PalmControlŽ is instantaneous with its response time and can stop dead and break the chip out with a quick snap at the end
of the cut. It can lay down a dozen short bursts of lines with ease and just as fast as a non-power tool.
The Classic PalmControlŽ includes
the handpiece itself, leather pouch, one presharpened carbalt graver, three HSS
graver blanks, hex wrenches, spare orings, setscrews, thumbscrews, handpiece
tubing and owner's manual. A stainless piston is included standard with the
tool. A tungsten piston is also available separately.